Start with the source of moisture
Masonry restoration can involve repointing worn mortar joints or replacing damaged bricks. If a wall stays damp, it’s worth finding out where the water is coming from before repairing the surface. Overflowing gutters, roof leaks and water collecting near a foundation can all contribute to damp masonry, but they call for different repairs.
Waterproofing and insulation services
Dapcco offers foundation waterproofing and negative waterproofing technology. Dapcco also offers flat roof waterproofing and leak repair, as well as Cork Plast Insulation. Negative-side waterproofing is applied to the side opposite the incoming water, such as the interior face of a basement wall. It may be considered when exterior access is limited. It does not stop water from reaching the outside of the wall, so exterior drainage is still worth checking.
Planning the work
Cost usually depends on the area affected, the depth of the damage and how easily the wall can be reached. Repointing a few joints is a different job from working on an upper storey that requires scaffolding. Foundation work can also vary considerably depending on whether excavation is needed. A small repointing job may take a day or two, while extensive repairs can take several days or longer. Weather and mortar curing can affect the schedule. Before an assessment, take photos of the affected areas and note whether dampness appears after heavy rain, during a thaw or even in dry weather.
Questions
What is repointing?
Repointing means removing deteriorated mortar from the joints and filling them with compatible new mortar. On older walls, compatibility matters: mortar that is too hard can contribute to damage in softer brick.
Does white powder on brick mean there’s a leak?
Not necessarily. The powder may be efflorescence, a salt deposit left behind as moisture evaporates. It indicates that moisture has moved through the material, but it doesn’t identify where the water came from.
Should a leak be fixed before damaged masonry is repaired?
Usually, yes. Identifying and addressing an active leak first helps reduce the risk of recurring stains or damage to repaired areas. Loose or unstable masonry should be assessed promptly rather than left until the moisture issue is resolved.

(905) 771 1383