Construction and Expansion Joint Waterproofing

Construction & (Expansion) Joints Waterproofing Vertical / Horizontal

Waterproofing construction joints is one of specific waterproofing services offered by our trained staff. Construction Joints Waterproofing as one of the time-consuming processes in waterproofing require a high accuracy and proficiency of technician.

Sealing the seam space and joints with a strong reinforced coating with CanProof A or B series is a secure method of filling and waterproofing the joints and guarantees a durable reinforced coating on joints for expansion or bending of metal sheets.

The joints from the depth to the surface are to be filled with the fillers of elastomeric material and then covered for protection. The high adhesion of CanProof A or B series products to metal substates and combination with the reinforcing layer of Lytren in the most appropriate and durable method of sealing joints.

What affects the scope and cost?

Waterproofing estimates typically depend on the total length of the joints, their width and depth, and how easily they can be reached. Removing old sealant or repairing damaged joint edges can add labor. The schedule also depends on how much preparation is needed and how long the materials must cure before the area can return to use.

Preparing for an assessment

Photos of the joint and the surrounding area are a useful starting point. Note where water appears, whether it shows up only after rain or during regular use, and whether the joint has been sealed before. If the area needs to stay open to traffic, flag that early so access and curing time can be planned.

Questions

What is the difference between a construction joint and an expansion joint?

A construction joint is where separate stages of construction meet, such as two concrete pours. An expansion joint is deliberately designed to accommodate movement. That distinction helps determine how flexible the waterproofing system needs to be.

Do vertical and horizontal joints need different materials?

Sometimes. Vertical joints usually need a filler that stays in place without sagging. Horizontal joints may need a system that can tolerate foot or vehicle traffic, or standing water, depending on where they are located.

Can a leaking joint be sealed over the existing material?

That depends on the condition and compatibility of the existing material. Loose or poorly bonded sealant usually needs to be removed so the new system can bond to a sound surface.